Metal Finishing, Centrifugal Deburring Machines, Metal Deburring, Metal Polishing, Luster Finishing, Mumbai, India

Home Product Feedback Contact Us
METAL FINISHING
 For Mass Finishing Operation where parts are being deburred & finished  with abrasive media & water, a suitable compound allows better control of  the process and can enhance the cutting action.
 Using our METFIN Media and Compound you can achieve good deburring  and luster finish. At the same time it will reduce process time & become  more economical. It gives good surface finish for your components & protect  the media from being consumed.
* All the METFIN compounds are developed for Tumbling, Vibratory or  Centrifugal deburring machines.
* Recommended concentration is 10 to 20 gms of METFIN compound in per  liter of water together with appropriate media. Operating parameters for  optimum results may be needed to establish by the customer by trial & error  for their particular finishing requirements.
* After each cycle, must use fresh water & compound which will give you a  better and faster result. Also, if the media is reduced, must load a new  batch of media. This will give fine cutting action and saves the process time.
* None of the METFIN Compounds does not damage the rubber or  polyurethene lining of your barrels. None of our METFIN Compounds does  not give any harm to your skin or body. It is biodegradable.
* Our packing comes in 30 and 50 kgs. METFIN compounds have a shelf life  of minimum 1 year. METFIN compounds has no toxi fumes and not hazards  in handling.
* In case if you have any specific application, kindly write to us, we will be  able to develop suitable compound to customers specification.
* For free sample and more details write to us about your component / metal  you require deburring & polishing.
 
 
Designed & Hosted by : MID | Promoted by : GID